Off season remodel and prep

Got the frame back from powder. Powder Coating AZ did a killer job.
Offloaded this thing and got right to work first thing was to tackle the 120 Dzus springs and damn am i glad that's over. I do not like when people coat the springs with the frames so I will always pull the springs and replace them with new ones but since I did this all last season they were all still good just had 200 rivets to remove from the springs what a pain.
Then I installed the gearbox, fuel tank, peddle assembly, radiator, and turning brake so i can make a couple new brake lines since I went with a new turning brake this time the empi ones have the ports coming out of the side and they were a little too close to the seat the ports on the jamar come out of the back so that fixes that issue. With that I have a brand new empi turning brake for sale shoot me a message. I then mocked up the seat just to make sure everything clears as it should and were good. on to the next taskIMG_1942.JPEGIMG_1941.JPEGIMG_1940.JPEGIMG_1939.JPEG
 
Last edited by a moderator:
Last nights project was to fit up the brake lines i was able to use a couple of the ones i made last year and only had to make 2 new ones.
also got the shifter installed and hooked up and placed the oil pump for the gearbox.IMG_1956.JPEGIMG_1955.JPEGIMG_1954.JPEGIMG_1953.JPEGIMG_1952.JPEGIMG_1951.JPEGIMG_1950.JPEG
 
Last edited by a moderator:
ive been slowly chipping away at this thing.
Front suspension is all on and buttoned up
engine, gearbox, wiring is all put in theres still a long list of things to do but its going. the painted shocks look so much better as well.
hopefully this weekend she is complete aside from some ods and ends.
 

Attachments

  • IMG_1975.JPEG
    IMG_1975.JPEG
    1.1 MB · Views: 22
  • IMG_1976.JPEG
    IMG_1976.JPEG
    796.3 KB · Views: 23
  • IMG_1969.JPEG
    IMG_1969.JPEG
    492.8 KB · Views: 22
  • IMG_1965.JPEG
    IMG_1965.JPEG
    707.7 KB · Views: 22
  • IMG_1974.JPEG
    IMG_1974.JPEG
    1.2 MB · Views: 22
Happy Friday here is some more pictures for your viewing pleasure. The work space is a complete disaster but its been thrash mode since I got the car back from powder.
 

Attachments

  • IMG_2001.JPEG
    IMG_2001.JPEG
    922 KB · Views: 24
  • IMG_1999.JPEG
    IMG_1999.JPEG
    1,011.5 KB · Views: 21
  • IMG_1995.JPEG
    IMG_1995.JPEG
    1 MB · Views: 21
  • IMG_1990.JPEG
    IMG_1990.JPEG
    1,011.3 KB · Views: 23
  • IMG_1991.JPEG
    IMG_1991.JPEG
    1.1 MB · Views: 23
Careful with those elbows at the intake. They like to collapse sometimes on hard pulls.
 
She's almost done!

need to make a support for the air filter.
PPF a bunch of areas that get blasted
Add grip tape to the nerf bars.
change the oil on the motor
slap some seats in and body panels on and she's ready to rip
the windshield frame had some imperfections so that's getting fixed up and that will be the last piece to the puzzle.IMG_2009.JPEGIMG_2008.JPEGIMG_2007.JPEGIMG_2006.JPEG
 
Last edited by a moderator:
ranman5608 said:
thank you sir how is your car coming along?
Click to expand...
I got the 2d installed with some minor fabrication toward the end of last season. I’m going to run it this season and then have some plans for the off season.
Thanks for asking.
 
You must log in or register to reply here.
Back
Top