Rowdyracing
New member
- Apr 1, 2025
- 12
- 22
Here's a couple free upgrades or changes I did to my new Pro R.
First one, Seat belt limiter bypass. I ALWAYS wear my seatbelt when riding anywhere offroad or even on road, but there are times where I don't need to be limited for not wearing it, like riding around camp site or from garage to street to load it in a trailer. The easiest solution for this is to just buy a plug and play bypass plug from amazon or XTC products ect... But if you want to do it yourself its pretty easy.
Unplug the seatbelt harness from the 6 point seat belt to the factory harness located between driver seat and center console.

Cut the other end of the harness flush with the seat belt buckle.

Cut the wires a few inches past the connector that is removed, strip and solder together. Insulate with heat shrink, plug back into RZR harness near center console and DONE.


First one, Seat belt limiter bypass. I ALWAYS wear my seatbelt when riding anywhere offroad or even on road, but there are times where I don't need to be limited for not wearing it, like riding around camp site or from garage to street to load it in a trailer. The easiest solution for this is to just buy a plug and play bypass plug from amazon or XTC products ect... But if you want to do it yourself its pretty easy.
Unplug the seatbelt harness from the 6 point seat belt to the factory harness located between driver seat and center console.

Cut the other end of the harness flush with the seat belt buckle.

Cut the wires a few inches past the connector that is removed, strip and solder together. Insulate with heat shrink, plug back into RZR harness near center console and DONE.

