Funco4JM
Active member
- May 5, 2021
- 236
- 132
Looking good man!
My 2006 Wuerth Motorsports Build
- Thread starter 602evo
- Start date
- Thread starter
- #102
602evo
Member
- Aug 15, 2021
- 96
- 95
Got the seats bolted in with the new brackets that set them back 2”. Very happy with the positioning! Felt like a sin putting these 1 year old harnesses on these brand new seats 
In addition, got the 3 additional lights to fill my light rack! This consists of 3 Triple R RP spots, and 2 Triple R RP Floods. Should be all good in the lighting department I’d say
In addition, got the 3 additional lights to fill my light rack! This consists of 3 Triple R RP spots, and 2 Triple R RP Floods. Should be all good in the lighting department I’d say
Attachments
- Thread starter
- #103
602evo
Member
- Aug 15, 2021
- 96
- 95
Also got my skid plate project complete. The main skid plate i made from 1/4" aluminum. This was easy as it was just a flat piece.
The rear section was more of a challenge with having to bend it to fit the kick in the tube for the engine cage. I made this portion out of 0.063". I know its thin, but I had a ton of it laying around and still want to keep things light. Its only purpose is to keep sand from getting in the belt grooves.
I don't have a sheet metal brake or way to bend it. so i used my side yard gate. Isn't perfectly straight but maybe a few wheelies will flatten it right out.
This car has never had a skid plate until now. Makes it look so much more complete, as well as increased peace of mind!
The rear section was more of a challenge with having to bend it to fit the kick in the tube for the engine cage. I made this portion out of 0.063". I know its thin, but I had a ton of it laying around and still want to keep things light. Its only purpose is to keep sand from getting in the belt grooves.
I don't have a sheet metal brake or way to bend it. so i used my side yard gate. Isn't perfectly straight but maybe a few wheelies will flatten it right out.
This car has never had a skid plate until now. Makes it look so much more complete, as well as increased peace of mind!
Attachments
Greg Rakes
Member
- May 8, 2021
- 81
- 66
Looking great! Are you going to be out for Veterans?
- Thread starter
- #105
602evo
Member
- Aug 15, 2021
- 96
- 95
thanks Greg! No i wish... i originally thought the celebration was the weekend of the 15th LOL. So it being pushed forward a week made me decide to wait until Thanksgiving. I'll be out there that whole week!
Greg Rakes
Member
- May 8, 2021
- 81
- 66
I’ll look for you that week. I’ll be there too
- Thread starter
- #107
602evo
Member
- Aug 15, 2021
- 96
- 95
Did a few other odds and ends over the past week or so. Did the CV's, chased the wire through the tube for the new light pod rack, got the fuel cell cover panel powder coated, and put in most of the floor panels.
I am waiting on some wrap to arrive today to wrap my panels and my car will be done!
I am waiting on some wrap to arrive today to wrap my panels and my car will be done!
Attachments
Funco4JM
Active member
- May 5, 2021
- 236
- 132
Coming along man! You gonna be ready to head out next Saturday?!
