Which Throw out bearing?????

[Rockwood]

Remove a TO bearing, clean and reuse?

Nope.

Always replace every single time the motor/trans is apart.

Mechanic buddy called them throwaway bearings. Good advice

 

[ChasingSand]

Looking at Kartek’s site and they only have the Italian throw out and not the German one. Anyone used this before?

 

[lincster]

Looking at Kartek’s site and they only have the Italian throw out and not the German one. Anyone used this before?

What PN are you looking at?
What trans?

 

[ChasingSand]

What PN are you looking at?
What trans?

It’s for a 2D.

MFG Number: 113-141-165-

 

[EVBM]

I had same issue, my understanding was the German is discontinued and the Italian is the new replacement.

 

[lincster]

It’s for a 2D.

MFG Number: 113-141-165-

Should be able to use either of the Albins TO bearings.
Depends on which clutch you are using if you need flat faced or convex.

I would think the flat face if you are using a Kennedy Clutch. PN WDLSC00170A
Call McMullen and verify.

 

[SeanRitchie]

This is what you need for a 2D. (The S4 adapter and Albins T/O won't work on a 2D as it's a larger diameter inner guide sleeve)

113-141-165-B | 113141165B | Weddle Industries | Racing Transaxles, Gears, Gearboxes, Clutches

weddleindustries.com