New clutch break in

[EastMT]

Is there an agreed upon new clutch break in procedure? New single disk, 2D , Honda 3.5. Got the Slave cylinder adjusted and shifting great. How many miles, what rpm or vary rpm, low load???

 

[Jammer75]

Grip it and rip it. When will you be at st. Anthony?

 

[EastMT]

When will you be at st. Anthony?

The 21st to 26th of this month.

 

[lincster]

I sure wouldn't put it on the dyno with a new clutch.
Just normal driving around for a bit and that is all that is needed.

 

[Rockwood]

I sure wouldn't put it on the dyno with a new clutch.
Just normal driving around for a bit and that is all that is needed.

Yep. Assuming you cleaned all the manufacturing/anti-rust schmoo off of everything before installing.

 

[Sandkist]

 

[77charger]

Never broke in a clutch just drive it.

 

[Dodd]

Just had mine rebuilt at McCleod. They said absolutely drive it lightly to medium through a couple heat cycles. We’ll see how that goes.

 

[J Alper]

These are not fragile clutches built for the street with ceramics in them, you have a fiber clutch with copper, same as a top fuel clutch,
There is ZERO break in on a 9'' and 8'' 6 puck clutch,

You are good to go,

 

[EastMT]

Thanks for all the answers. Hopefully everything goes well on my St Anthony trip.