the 2500 mile trip begins, working on upgrades 2017 X3

[John@Outfront]

Who supplies the floor bar kit ?

I bought everything from S3 There were three kits I bought. Front bolt on double shear brackets. The weld in front gusset kit and I think the floor and rear section kit

 

[John@Outfront]

A little walk around video

 

[ROBERT L]

Are you drilling the floor rivet holes out bigger for those washers? Are they 6mm bolts?

Drill out the rivet holes for the size of the nutsert. Then you can open up the skid plates to accommodate the dish in the washer. I would post pictures but I don’t have access to my car at the moment.

 

[megadesertdiesel]

I did this to a 2020 frame a while back and used every gusset made plus more I made.

Nutcerts are definitely worth it

 

[John@Outfront]

I did this to a 2020 frame a while back and used every gusset made plus more I made.

Nutcerts are definitely worth it

View attachment 184135View attachment 184136View attachment 184137View attachment 184138

So did you use the same frame and added gussets or did you also buy a new frame?

 

[John@Outfront]

While your at I would install nutserts for the floor. I did that a couple years ago. So much nicer when changing the oil.
This is what I used on mine.
View attachment 184133

Did you only put these on the rear skid plate under the motor or the entire bottom skid plate

 

[ROBERT L]

Entire car

 

[megadesertdiesel]

So did you use the same frame and added gussets or did you also buy a new frame?

Bought a new max frame from BRP, had it stripped and sandblasted. Welded all my shit on then used Steel-It to coat. I went from a 2017 two seater to a 2020 4 seat frame, just had to buy longer drive line and some plastic pieces.

 

[John@Outfront]

Bought a new max frame from BRP, had it stripped and sandblasted. Welded all my shit on then used Steel-It to coat. I went from a 2017 two seater to a 2020 4 seat frame, just had to buy longer drive line and some plastic pieces.

i was planning on having it powder coated but maybe i should consider just steel-it on the new bars and gussets

i think my powder coated said he could powdercoat right over the current powder coat because its new--thoughts

 

[megadesertdiesel]

i was planning on having it powder coated but maybe i should consider just steel-it on the new bars and gussets

i think my powder coated said he could powdercoat right over the current powder coat because its new--thoughts

I like the Steel-it, its easy to touch up and when you weld on a tab you dont have to worry about ruining powdercoat

 

[Reece Pettersen]

I am a big fan of powder coating frames. We did my 1600 car in steel it, and it didn't hold up for more than a year or two. Only recommend steel it on parts that need constant service or mag inspection, like arms.

 

[Sand Shark]

i was planning on having it powder coated but maybe i should consider just steel-it on the new bars and gussets

i think my powder coated said he could powdercoat right over the current powder coat because its new--thoughts

Steel it you can weld on it and touch up. Steel it holds up well too.

 

[John@Outfront]

Steel it you can weld on it and touch up. Steel it holds up well too.

im kind of leaning this way as its not the whole frame and really all the things i did are not seen at all. maybe just do my cage and front bumper as they are orange going to talk to my powder coater again

 

[JC47]

i was planning on having it powder coated but maybe i should consider just steel-it on the new bars and gussets

i think my powder coated said he could powdercoat right over the current powder coat because its new--thoughts

I powder coat fence daily, so not the same as car frames, but we will recoat powder, I just always let the customer know the new coat will only be as good as the last coat will hold. If the first coat isn't great, the second one will definitely fail over time

 

[John@Outfront]

I powder coat fence daily, so not the same as car frames, but we will recoat powder, I just always let the customer know the new coat will only be as good as the last coat will hold. If the first coat isn't great, the second one will definitely fail over time

thanks for that info!!!