CNC clutch pedal stop Idea’s

[ChasingSand]

Need to make a clutch stop on my CNC pedals. Was thinking of welding a barrel nut to the pedal and adding a bolt with a rubber stopper. Problem is I don’t have a ton of time to do this as I leave on Thursday. Anyone have an easy solution?

 

[wesinls]

i use this one...its on other sites for cheaper - but this is who I bought it form in 2020.

Pro-werks Pedal Stop Kit

Pedal Stop Kit. Limits pedal travel and prevents over-traveling of a pressure plate when using single pedal assembly for clutch application. This universal weld-on adjustable pedal stop can be used with levers or pedals to prevent over traveling. Fabricated with Chromoly (4130N) tubing.

chassisshop.com.

 

[punkur67]

Replace the top master cylinder mount bolt with a longer one and double nut. Adjustable, quick, and easy

 

[Chingon619]

Replace the top master cylinder mount bolt with a longer one and double nut. Adjustable, quick, and easy

This! Exactly this. I used 3/8 threaded rod, double nut to tighten and cut at the approximate length and then adjusted accordingly. Pretty straightforward and best mod ever!

 

[lincster]

Replace the top master cylinder mount bolt with a longer one and double nut. Adjustable, quick, and easy

This. Takes 5 min.

 

[DarkSide]

Replace the top master cylinder mount bolt with a longer one and double nut. Adjustable, quick, and easy

I did this as well.