Wheel questions

[Sethmorast]

So I just bought a hybusa sand rail and it has a set of combo spindles on the front. I’m looking to put a set of can am wheels and tires on it but would like to just change the hubs to that bolt pattern. The only other thing I think I could do which I don’t like would to be to go to wide force then an adapter from there. Rather have the car set up to just bolt a set of sxs wheels. Just curious if anyone has seen or knows of a shop that can do it.

 

[megadesertdiesel]

sxs wheel and tire setups are heavy and i doubt that car will hold up with all that weight on the front corners.

 

[Dune-Track-N]

you want a canam hub to fit a combo snout? You'd need to know the bearing sizes to see what can be done. Likely a canam stub axle machined down and welded to the combo spindle

been trying to find an adapter for my dad that goes from VW wide5 to 4-156 for similar reasons, nada so far
I don't think the weight is an issue.... steel 15" VW wheel and street tire vs alum rzr rim and ohv tire. They can't be that different.

 

[Dune-Track-N]

you want this bearing https://kryptoniteproducts.com/prod...mGtpBWXT_d08u8-41aA-S1c9K0-ET2mGgagJx9HSIRZUo

to fit on combo stub which is 1.25 and 1 inch bearings

Timken 15123 Inner Combo Link Spindle Tapered Roller Bearing 1-1/4" Inside Diameter Uses 15244 Race - Kartek Off-Road

Timken 15123 Inner Combo Link Spindle Tapered Roller Bearing 1-1/4" Inside Diameter Uses 15244 Race for offroad racing in the King of the Hammers, New Zealand Taupo 1000, Dakar Rally, Tatts Finke Desert Race, Score International Baja 500 or Baja 1000, Mint 400, Vegas to Reno, Silk Way Rally...

www.kartek.com

Timken 07100 Outer Combo Link Spindle Tapered Roller Bearing 1" Inside Diameter Uses 07204 Race - Kartek Off-Road

Timken 07100 Outer Combo Link Spindle Tapered Roller Bearing 1" Inside Diameter Uses 07204 Race for offroad racing in the King of the Hammers, New Zealand Taupo 1000, Dakar Rally, Tatts Finke Desert Race, Score International Baja 500 or Baja 1000, Mint 400, Vegas to Reno, Silk Way Rally, Crandon...

www.kartek.com

see the problem is the stub axle / wheel hub

Can Am X3 OEM Wheel Hub with Wheel Studs 2017-2023

BRP OEM Factory Wheel Hub for All 2017-2023 Can-Am X3 Models Pre-Installed OEM BRP Studs (Qty 4) to save you time and money Assembly includes: BRP Part # 705502122 - Qty 1 - Can Am X3 OEM Wheel Hub - Fits Front / Rear BRP Part # 250300625 - Qty 4 - Can Am X3 OEM Replacement Wheel Stud M12x1.5

utvraceshop.com

What you need is this stub end of the axle

 

[Dune-Track-N]

fastest option would be to buy these and weld them to the combo

WSRD x MCM 2WD Axle Delete Stubs | Can-Am X3

Another WSRD x MCM Fab & Designs product offering record setting results! When looking to maximize your machines performance, and converting your machine to 2WD look no further than the WSRD x MCM Axle Delete Studs. These are CNC precision machined with a billet aluminum construction. These...

trealperformance.com

 

[honEXduner]

you want this bearing https://kryptoniteproducts.com/prod...mGtpBWXT_d08u8-41aA-S1c9K0-ET2mGgagJx9HSIRZUo

to fit on combo stub which is 1.25 and 1 inch bearings

Timken 15123 Inner Combo Link Spindle Tapered Roller Bearing 1-1/4" Inside Diameter Uses 15244 Race - Kartek Off-Road

Timken 15123 Inner Combo Link Spindle Tapered Roller Bearing 1-1/4" Inside Diameter Uses 15244 Race for offroad racing in the King of the Hammers, New Zealand Taupo 1000, Dakar Rally, Tatts Finke Desert Race, Score International Baja 500 or Baja 1000, Mint 400, Vegas to Reno, Silk Way Rally...

www.kartek.com

Timken 07100 Outer Combo Link Spindle Tapered Roller Bearing 1" Inside Diameter Uses 07204 Race - Kartek Off-Road

Timken 07100 Outer Combo Link Spindle Tapered Roller Bearing 1" Inside Diameter Uses 07204 Race for offroad racing in the King of the Hammers, New Zealand Taupo 1000, Dakar Rally, Tatts Finke Desert Race, Score International Baja 500 or Baja 1000, Mint 400, Vegas to Reno, Silk Way Rally, Crandon...

www.kartek.com

see the problem is the stub axle / wheel hub

Can Am X3 OEM Wheel Hub with Wheel Studs 2017-2023

BRP OEM Factory Wheel Hub for All 2017-2023 Can-Am X3 Models Pre-Installed OEM BRP Studs (Qty 4) to save you time and money Assembly includes: BRP Part # 705502122 - Qty 1 - Can Am X3 OEM Wheel Hub - Fits Front / Rear BRP Part # 250300625 - Qty 4 - Can Am X3 OEM Replacement Wheel Stud M12x1.5

utvraceshop.com

What you need is this stub end of the axle
View attachment 131147

Correct me if I'm wrong, but doesn't the CanAm hub rotate inside the spindle mounted bearing with the axle stub running through the center? The axle stub does not move relative to the hub so even welding that cutoff in place of the combo spindle will not allow for rotation.

 

[honEXduner]

fastest option would be to buy these and weld them to the combo

WSRD x MCM 2WD Axle Delete Stubs | Can-Am X3

Another WSRD x MCM Fab & Designs product offering record setting results! When looking to maximize your machines performance, and converting your machine to 2WD look no further than the WSRD x MCM Axle Delete Studs. These are CNC precision machined with a billet aluminum construction. These...

trealperformance.com

These are just inserts to use in place of the axle shaft to keep the hub together when converted to 2wd.

 

[madweazl]

So I just bought a hybusa sand rail and it has a set of combo spindles on the front. I’m looking to put a set of can am wheels and tires on it but would like to just change the hubs to that bolt pattern. The only other thing I think I could do which I don’t like would to be to go to wide force then an adapter from there. Rather have the car set up to just bolt a set of sxs wheels. Just curious if anyone has seen or knows of a shop that can do it.

Is there a particular reason you want to go from a tried/true spindles with plenty of wheel options to the Can Am hub? Seems like a downgrade to me.

 

[Sethmorast]

sxs wheel and tire setups are heavy and i doubt that car will hold up with all that weight on the front corners.

They are lighter then wheels that are on it now

 

[Sethmorast]

you want this bearing https://kryptoniteproducts.com/prod...mGtpBWXT_d08u8-41aA-S1c9K0-ET2mGgagJx9HSIRZUo

to fit on combo stub which is 1.25 and 1 inch bearings

Timken 15123 Inner Combo Link Spindle Tapered Roller Bearing 1-1/4" Inside Diameter Uses 15244 Race - Kartek Off-Road

Timken 15123 Inner Combo Link Spindle Tapered Roller Bearing 1-1/4" Inside Diameter Uses 15244 Race for offroad racing in the King of the Hammers, New Zealand Taupo 1000, Dakar Rally, Tatts Finke Desert Race, Score International Baja 500 or Baja 1000, Mint 400, Vegas to Reno, Silk Way Rally...

www.kartek.com

Timken 07100 Outer Combo Link Spindle Tapered Roller Bearing 1" Inside Diameter Uses 07204 Race - Kartek Off-Road

Timken 07100 Outer Combo Link Spindle Tapered Roller Bearing 1" Inside Diameter Uses 07204 Race for offroad racing in the King of the Hammers, New Zealand Taupo 1000, Dakar Rally, Tatts Finke Desert Race, Score International Baja 500 or Baja 1000, Mint 400, Vegas to Reno, Silk Way Rally, Crandon...

www.kartek.com

see the problem is the stub axle / wheel hub

Can Am X3 OEM Wheel Hub with Wheel Studs 2017-2023

BRP OEM Factory Wheel Hub for All 2017-2023 Can-Am X3 Models Pre-Installed OEM BRP Studs (Qty 4) to save you time and money Assembly includes: BRP Part # 705502122 - Qty 1 - Can Am X3 OEM Wheel Hub - Fits Front / Rear BRP Part # 250300625 - Qty 4 - Can Am X3 OEM Replacement Wheel Stud M12x1.5

utvraceshop.com

What you need is this stub end of the axle
View attachment 131147

Thank you very much

 

[Sethmorast]

fastest option would be to buy these and weld them to the combo

WSRD x MCM 2WD Axle Delete Stubs | Can-Am X3

Another WSRD x MCM Fab & Designs product offering record setting results! When looking to maximize your machines performance, and converting your machine to 2WD look no further than the WSRD x MCM Axle Delete Studs. These are CNC precision machined with a billet aluminum construction. These...

trealperformance.com

View attachment 131148

That’s looking like my favorite option

 

[honEXduner]

That’s looking like my favorite option

This won't work if welded onto your spindle uprights, it's not load bearing