Valve Cover breather catch can filter size

C

ChasingSand

Well-known member
Joined
May 5, 2021
Messages
992
Reaction score
527
Wanted to see what of filter/outlet people are using on their catch cans/breathers for the motors. Catch can I am running has a 1 inch outlet but I am not sure that has enough flow. I was chasing a turbo drain line backing up issue last season and I finally realized my crank case pressure was too high as I did not have proper ventilation of the valve covers.

What size filter outlets are on your catch can and with what motor?

 
Supercharged LS1, 13 lbs of boost.

I run -10 vents from each valve cover to a catch can.

 
ChasingSand said:
What size filter inlet do you have on the catch can?
Click to expand...
I use Moroso 85468 catch can.  3" filter I think.

mor-85468_rz_xl.jpg


 
Last edited by a moderator:
I use the Motion Raceworks Breather can on mine.  2 -10AN breather hoses (one from each valve cover) to the can with a 3" filter on top.  NA LS6 for me. 

 
Funco4JM said:
I use the Motion Raceworks Breather can on mine.  2 -10AN breather hoses (one from each valve cover) to the can with a 3" filter on top.  NA LS6 for me. 
Click to expand...
Do you have any pics of how you mounted it?

 
I’m also running -10 fittings welded to the valve covers plumbed to a motion raceworks catch can, ball valve on the catch can and a drain line through the skid plate. Lots of moisture running e85 so I’ll drain it every morning. 

 
You must log in or register to reply here.
Back
Top