Remark Gear Indicator S4 Mendeola

[GeneralG]

Looking for a new or used deal on the Remark Gear Indicator for the Mendeola S4 trans.    Would like to know as well if anyone has been able to use the Holley ECU for gear a indicator.

 

[SeanRitchie]

When did you buy your trans?

If you have received a new trans in the past year or so, it will likely have our new Gen 3 shift mechanism, and require this dash display kit, which we do have in stock, you just have to call me and order directly. https://weddleindustries.com/products/8-S45-DM-A/8-S45-DM-A

If you have an earlier trans with the larger front "boss" sticking off the front cover, then you will need this kit: https://weddleindustries.com/products/8-S45-DM/8-S45-DM

Both of these can be wired into a digital dash display, but you will need to manually program the display for each gear position. You can buy the Gen 2 and Gen 3 sensors separatetly if you do not want to purchase the separate display. The Gen 3 mechanism uses a much higher resolution gear position sensor that has a "finer" voltage readout that is much better for No-Lift-Shift actuations through the ECU. 

 

[GeneralG]

Thanks Sean,  I'm thinking maybe just purchasing the sensor for the trans to use the Holley digital dash for the indicator now.

 

[Grease Monkey]

I was able to do the same and program my AEM display to indicate gear position.