rear brakes help

[Desertanddune]

scorpion car, gearone brakes,  went from  2 piston to 4 piston caliper, 

the rotor  is almost rubbing  on the caliper  everything is tight.

  is there  a wider caliper mount  or is there a different  rotor mount  to move  rotor  1/16 or so

  thanks in advance for your help.

 

[Desertanddune]

picture attached

 

[L.R.S.]

Unfortunately those calipers don't work on those arms woth the mounts. @parker@gearonemay be able to help.

 

[Jtmoney714]

I’ve seen guys mill off a little of the mounting section of the caliper. But I think you’re too far off for that. 

 

[Desertanddune]

thanks ill message parker

 

[parker@gearone]

623-695-4263 this is my cell give me a call, I leave for Glamis in a few hours but as long as I have reception I can help.

@Desertanddune

 

[KLC]

 

[Badbar88]

Had the same issue with my Gray Area brakes. I took em over to Bob at RBP and he milled the caliper just a bit

 

[Badbar88]

 

[Desertanddune]

parker @ gearone hooked  me up machined a spacer plate,   looks  and works great . Replaced bearing and seals too, while i was at it  car is now at buckshot for frame repairs thansk for the help.