LS Throttle Cable Type and Mounts

[wesinls]

What type of cable are you using - and what type of throttle cable support are you using on your LS?  With my push-pull cable it looks like the below are my two options...

Hoping people can post pictures of their setups and what brackets their using for cable supports...I'm also looking into which throttle body I should purchase for an LS3.

Thank you!

 

[Schmidty]

if possible, i'd recommend the cable on the cam version, as sometimes depending on your cable mount height and angle; the clip on one will not open the butterfly all the way.

 

[FOG]

I would recommend https://www.controlcables.com

They have always been able to make whatever you need. 

 

[J Alper]

I would not hook it to the Transmission kickdown/pressureLine,  I use a Heim and make a bolt on throttle arm out of 1/8 material, 

If it is a LS3 stock then use a 92mm so the tip in is not erratic ,  If you can not fabricate a arm then use the cable that raps around like factory, 

 

[lincster]

Here is my setup.  Has worked fine for years.