Funco Dimensions

A

AlpineFunco

Well-known member
Joined
May 5, 2021
Messages
738
Reaction score
901
Used to be able to just search here and find them but obviously that's changed. I put the car on jack stands, pulled the wheels, pulled the trailing arms, then remembered I need to be on the lookout for an enclosed over the summer. So, anybody know the width of a Gen 4 with paddles (Dunesport 14.50)? Feel free to add front tire widths and lengths as well as I'm sure the question will be asked in the future.

 
AlpineFunco said:
Used to be able to just search here and find them but obviously that's changed. I put the car on jack stands, pulled the wheels, pulled the trailing arms, then remembered I need to be on the lookout for an enclosed over the summer. So, anybody know the width of a Gen 4 with paddles (Dunesport 14.50)? Feel free to add front tire widths and lengths as well as I'm sure the question will be asked in the future.
Click to expand...
If I recall front is 82" and rear is 95".

 
Can anybody confirm if 95 is width at the paddles??

 
I measured my car recently at about 94.5. That is after Microstubs and making the car wider when I welded up the trailing arms. I would say correct width would be around 92.5. 

 
onanysunday said:
I measured my car recently at about 94.5. That is after Microstubs and making the car wider when I welded up the trailing arms. I would say correct width would be around 92.5. 
Click to expand...
Edit. Now I am second guessing that dimension. I would need to jack the car up and bolt them on to check. I know my car is now approx. 2.2" wider than stock.

 
Who has gen 4 with LS measurements? Specifically length with wing?

 
You must log in or register to reply here.
Back
Top