Search results

Currently my buss bars, relays, and circuit breakers are mounted behind the passenger seat which has to be removed to do anything besides change a relay. I would like to move all the electrical components to the front of the car mounted in a weather proof enclosure for easier access should I...

Considering getting new springs for my Squirt. What spring rates (tender and main) are you using on a 2 seat Squirt? Is it a short or extended 2 seat model? What engine do you have (just asking to take engine weight into consideration)? If you had to buy springs again would you buy the same rate...

Try 1/2 of the smallest mg pill of  Diphenhydramine 

Someone mentioned increasing the rear tire pressure when the sand is wet for less bit. How high of a PSI would you go? 33” and beadlock if it makes a difference.

Packing up / loading up to head down to St Anthony. I've been running against the clock to get new radiator, CV's with zerks, and Alper modified 2" hollows spindles installed on the Squirt with little time off from the plantation. Go most of it buttoned up late last night. A big thanks to @J...

Will anyone be at St Anthony the 21st - 24th? If so I'll be at IDRV space 23, stop by and say hi. Also looking for a group to ride with.

The rear upper shock mount bolts have nylon locknuts while the trailing arm shock mount bolts have prevailing torque / Stover lock nuts on my sandcar. Is there any reason that one was used instead of the other for the upper or lower shock mounts? 

Both wheels have a flat spot (prior owner) , one is more noticeable than the other. I couldn’t feel any thumpity thumpity but you can see it plain as day watching the wheels go around. I’d consider these spares. The two 6.80-15 tires age is unknown but have cracks, most likely old.  One held air...

How about increase your budget a little and look for a yamaha YXZ100R?

What is the name of the devise that varies the speed of the brushless radiator fans to prevent the sudden load of the fans turning on and off via a relay? The devise kept the fans running at a slow speed instead of turning them off. Is there any reason not to use one in a sandcar? Any...

Is there anything wrong with placing the lower mount off the same tube the that the tray was on like in this picture? The mounts has not arrived yet so I taped a cardboard copy for the picture.

I will be mounting a new radiator and would like some opinions, suggestions, and ideas. It will be mounted about 4” to the rear of where the previous radiator was to make room for an intercooler should I ever turbocharge the engine. I would like the reworked mounting to look professionally done...

Is axle freeplay correctly measured with the suspension drooped all the way or with the hubs in line horizontally with the trans or both? At full droop I have 11/16” on one side and 1-1/8” on the other side of in out freeplay. Is that in the normal range or excessive? 

What are some good brands of beadlock wheels? I'd like to buy some good ones but am not on an unlimited budget. Are there any brands to stay away from or have been known to be so so quality? Will be fronts and wide 5 pattern. Thanks

Thanks, I am ordering the tool in the lower picture. These are the ring I was hoping to find a wrench for.

Where does a guy buy a spanner wrench for King cross over rings? All the cross over ring spanner wrenches I have found are only for Fox shocks.

What is a good funnel to stick in the filler neck of a sandcar that has a mesh screen filter fine enough to catch sand?