Search results

thank you, i will look into the LS swap then. I know you can find LS motors easier

hum guess not many have changed out or looked for shortstar

Lots of blow by and low oil pressure ..looking for another shortstar , hard to find. Best recommendation for changing to Honda V6 or a place to find a shortstar TIA

installed new seat covers, there are slots in the seat for belts to go through but none in material underneath, what is the best way to make provisions for the belts to go through instead of around the seat like it use to?

It's definitely the cv clicking on throttle, off throttle they get louder . Old axles didn't click till the grease was low/ worn  added grease stopped clicking . Reason I changed is because  I put new boots on  cv was stuck on old axles  measured to get new axles  cleaned and polished cv...

So among other things fixing. getting car ready for the season servicing CV's one was stuck on the axle. So measuring for axles, old axles 21" measured car  cup to cup 22 3/4 got axles 22 1/4 cleaned and polished 930CV set it all up new grease swepco and belray   driving around the block...

hoses on my car are expanded and not looking good, want to go to silicone hoses, is that recommended? where do find them? I have looked at Moore parts and Kartech they don't have them listed unless i'm missing them, any help is greatly appreciated.

hoses on my car are expanded and not looking good, want to go to silicone hoses, is that recommended? where do find them? I have looked at Moore parts and Kartech they don't have them listed unless i'm missing them, any help is greatly appreciated.

picture attached

scorpion car, gearone brakes,  went from  2 piston to 4 piston caliper,  the rotor  is almost rubbing  on the caliper  everything is tight.   is there  a wider caliper mount  or is there a different  rotor mount  to move  rotor  1/16 or so   thanks in advance for your help.

A few photos added 

Just got back for desert over weekend hit hard a few times but never slammed down. Cleaning car noticed shock bolts bent  Does that mean my shocks are wrong ,or just set up wrong ?  What should I do?  TIA  for any suggestions or help

Im not keen on how this looks either. Its def sketchy. Would something like this work?

So as im  going through the car I see shifting rod is rubbing on seat driver side has spacers. Passenger is on the floor . If drivers seat didnt have spacers it would rub also . Can anyone show pictures of seat mounts or suggest mount ideas to lift seats 2-3 inches  Scorpion sand car  

Close but hook up for tie rod on mine are longer.   Looks to be about 6+ inches long . in 3rd picture you can see where tie rod hooks to rack and Mount rack piece is  Also mounting holes look different. I will take measurement tomorrow afternoon and post  Thank you I will look at it when i get...

While out this weekend had steering shaft come off rack. Shaft bent and mount on rack for steering shaft is stripped. I spent the day looking for anything close to replacment parts, and cant find anything. Can anyone help with suggestion or part knowledge would greatly appreciate it  TIA

2- Empi 15x10 beadlock 4 1/4 in backspace no hardware good condition dont fit car $200 plus shipping