Recent content by Richard h

  1. Richard h

    The official Honda Thread

    Thanks. we will swap it out with another we have and see if it works.
  2. Richard h

    The official Honda Thread

    Looking for any ideas. Honda 3.5 A4 motor runs great until it gets to operating temperature. The fans will come on and the motor will not rev over 3000 to 3200 rpm. Acts like its hitting the rev limiter. Once it cools back down it runs fine. Any ideas or anybody had similar issues with theirs?
  3. Richard h

    Camber angle on front of sand rail?

    I built my own arms and spindles and was able to get just that. Get camber to maintain it's angle through the travel. I wanted it set so it wouldn't go positive at any point. What will happen though is the car will "roll" with the turn, and making outside steer tire plant and not roll into a...
  4. Richard h

    Camber angle on front of sand rail?

    Why we see drag cars run so much caster. I was lucky and had a Hunter 4 wheel machine and got to play with this stuff a lot.
  5. Richard h

    Camber angle on front of sand rail?

    I ran about 2 degrees camber as well. Caster, the more you run the more the tires want to return to straight after a turn. I ran around 8 t0 10 degrees.
  6. Richard h

    It's Saturday Jan 25th 2025.. What is everyone doing this weekend?

    Go shopping after they cross the floor out in the field. Half price or even less out there. Personal experience, sold a 57 t bird their. Car was even listed and pictured in the brochure.
  7. Richard h

    Paddle Tire Choice - Stock Honda 3.5 - Small 2 Seat - 2D

    I liked the Dune Sport 14.5x15 # 2 cut, Worked great. 3.5 2d 2 seat mid engine car
  8. Richard h

    Ruts are killing me!

    What makes the summer trips great! No ruts and very smooth dunes. Go early am and late afternoon for runs. Hang under shade mid day and it works great.
  9. Richard h

    It's Saturday Jan 11th 2025.. What is everyone doing this weekend?

    Spent many days in summertime there. Really enjoy the downtown event on Saturday mornings.
  10. Richard h

    Stuck rail

    Never, never, ever dune alone!
  11. Richard h

    Bent Trailer Axle

    You can measure the toe in, out. Tape between tires on inside front and back. You can put a level on tires vertically and see how the compare side to side and also how far off of plumb they are and which way.
  12. Richard h

    Bent Trailer Axle

    Take a picture from the rear that will show tire angles. May have to get back a little. There are ways to straighten yourself if you want. Happy to guide you.
  13. Richard h

    IDing a Honda J35 A3 or A4

    Yes, forgot, motors did have marking like in photo.
  14. Richard h

    IDing a Honda J35 A3 or A4

    I trusted the people who I bought my motors from. Bought several and never had an issue. Scotts Honda Salvage in Fort Collons Co. Isn't it only year 2004 and maybe early 05's Went back and looked at pic's and yes. all of mine had the rectangle you show on them. Is that positive id??????
  15. Richard h

    It's Saturday Dec 21st 2024..What is everyone doing this weekend?

    Reading this morning. I am too old I guess, the language is hard for me to read. I hope to be better.
Back
Top