lincster's latest activity

  • lincster
    lincster replied to the thread Weekend Warrior Ramp Door Pix.
    Getting close. Added more steel in the small sections at the top of the door where I drive my rail in. Used Loctite 410 to adhere the...
    • IMG_1585.jpeg
    • IMG_1586.jpeg
    • IMG_1587.jpeg
    • 0beaf270-49f6-450c-804e-41aae5946687.jpeg
  • lincster
    lincster replied to the thread Weekend Warrior Ramp Door Pix.
    Ramps were rated to 3500 lbs. per Weekend Warrior. There is never more than 2 tires on the ramp at any 1 time, not with the full size...
  • lincster
    lincster reacted to acefuture's post in the thread Weekend Warrior Ramp Door Pix with Like Like.
    Mine blew through the frame last season. It didn't have steel or aluminum reinforcement, just the small 2x2 wood. I got the door back in...
  • lincster
    lincster reacted to BaBaBouy's post in the thread Stuck CV - Or Trans? with Like Like.
    I had a similar problem, I fixed the issue by draining the fluid and covering the case with $100 bills…
  • lincster
    lincster replied to the thread Weekend Warrior Ramp Door Pix.
    Wanted to update this and add what my ramp door looks like. Has steel under the wood. I was surprised. Going to add more steel when...
    • IMG_1533.jpeg
    • IMG_1534.jpeg
    • IMG_1535.jpeg
    • 79133923735__79E339CD-B4DD-4F66-B44D-4D383EA57794.jpeg
  • lincster
    lincster replied to the thread Stuck CV - Or Trans?.
    Trans needs to come out. Car rolled once you removed the CV/Axle because these trans axles are "open diffs", meaning 1 side will spin...
  • lincster
    lincster replied to the thread Coil carrier set up?.
    King recommends a certain amount of oil to be used for coil carriers and no reservoir. Amount of oil is based on shock size/stroke...
  • lincster
    lincster replied to the thread School me on sand cars lol.
    More of a bummer is if you have Outboards. :)
  • lincster
    lincster replied to the thread School me on sand cars lol.
    S4 minimum. Midboard hubs minimum. 2" Hollows. Bypass all around (rear minimum). Need to be able to turn wrenches. Boost makes duning...
  • lincster
    lincster replied to the thread LS1 Cam Spec.
    Apples and Oranges. No cam you install will behave like a supercharged motor. Been there, done that. Cam'd my LS1 etc. Then started with...
  • lincster
    lincster replied to the thread LS1 Cam Spec.
    Agreed. Grab 2nd and push the go pedal!!!!
  • lincster
    lincster reacted to acefuture's post in the thread Which CV grease to use? with Haha Haha.
    Oh yes, thanks for reminding me about my favorite thread once again. I will be switching to a mixture of Vaseline and KY Jelly for the...
  • lincster
    lincster reacted to Ripster's post in the thread Which CV grease to use? with Like Like.
    I'm doing a mid-season service on my car now; I've always used Bel-Ray and Swepco 101 for 20 plus years. I'm going to Give Parkers New...
  • lincster
    lincster replied to the thread Holley ECU.
    Could be. I didn't wire my car. I had it done.
  • lincster
    lincster reacted to Kraut_n_Rice's post in the thread Holley ECU with Like Like.
    This is kinda what I figured. You pick an input name, then have to map out the data.
Show older items
Back
Top